Sony SLT-A65VL - Manual (Page 141)

141
Selecting the drive mode
Shoo
ting (Advanced op
erations)
Notes
• When the mode dial is set to M, the exposure is shifted by adjusting the shutter
speed.
• When you adjust the exposure, the exposure is shifted based on the compensated
value.
• The bracket cannot be used when the exposure mode is set to AUTO, AUTO+,
Continuous Advance Priority AE, Sweep Panorama, 3D Sweep Panorama, or Scene
Selection.
• When the flash is fired, flash bracket shooting is used to shift the amount of flash
light. To shoot, press the shutter button shot by shot even when [Bracket: Cont.] is
selected.
The EV scale in bracket shooting
1
on the control button t
(Bracket: Cont.) or
(Single Bracket) t Select
the desired bracket step
2
Adjust the focus and shoot the subject.
The base exposure is set at the first shot in the bracket.
• Press and hold the shutter button until recording stops when [Bracket:
Cont.] is selected.
• Press the shutter button shot by shot when [Single Bracket] is selected.
Ambient light* bracket
0.3 steps, 3 shots
Exposure compensation 0 Flash bracket
0.7 steps, 3 shots
Flash compensation –1.0
Viewfinder
LCD monitor (When
[DISP Button(Monitor)]
is set to [For
viewfinder])
Shown in the top row. Shown in the bottom row.