Sony SLT-A65VL - Manual (Page 127)

127
Shoo
ting (Advanced op
erations)
Setting ISO
Sensitivity to light is expressed by the ISO number (recommended
exposure index). The larger the number, the higher the sensitivity.
Notes
• When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep
Panorama, or Scene Selection, ISO is fixed to [AUTO] and you cannot select other
ISO numbers.
• When the exposure mode is set to P/A/S and ISO is set to [AUTO], ISO is
automatically set between ISO 100 and ISO 1600.
• The [AUTO] setting is not provided in exposure mode M. If you change the
exposure mode to M with the [AUTO] setting, it is switched to [100]. Set the ISO
according to your shooting conditions.
The camera automatically shoots multiple images continuously, combines
the images, reduces the noise, and records 1 image. In multi frame noise
reduction, you can select larger ISO numbers than the maximum ISO
sensitivity.
The image recorded is 1 combined image.
Notes
• When [Quality] is set to [RAW] or [RAW & JPEG], this function cannot be used.
• The flash, D-Range optimizer, and [Auto HDR] cannot be used.
1
Press the ISO button to display
the ISO screen. ISO button
2
Select the desired setting with v/V on the control button.
• The larger the number, the higher the noise level.
• If you want to select [Multi Frame Noise Reduct.], display the setup screen
with B, and select the desired value with v/V.
Multi frame noise reduction