Sony SLT-A65VL - Manual (Page 163)

163
Setting the other functions of the camera
Setup of the camera (Advanced op
erations)
Notes
• When you shoot at high shutter speeds with a large diameter lens attached, the
ghosting of a blurred area may occur, depending on the subject or shooting
conditions. In such cases, set this item to [Off].
• When a Konica Minolta lens is used, set this item to [Off]. If you set this item to
[On], the correct exposure will not be set or the image brightness will be uneven.
The brightness of the LCD monitor is automatically adjusted to the
surrounding lighting conditions using the light sensor (page 15).
You can set the brightness of the LCD monitor manually.
MENU button t 1 t [LCD Brightness] t Select the desired
setting
Notes
• When it is set to [Auto], do not cover the light sensor with your hand and so on.
• When using the camera with the AC-PW10AM AC Adaptor (sold separately), the
brightness of the LCD monitor is always set to the brightest setting even if you select
[Auto].
The brightness of the viewfinder is automatically adjusted to the lighting
conditions of the subject.
You can set the brightness of the viewfinder manually.
MENU button t 1 t [Viewfinder Bright.] t [Manual] t
Select the desired setting
Note
• When using the camera with the AC-PW10AM AC Adaptor (sold separately), the
brightness of the viewfinder is always set to the brightest setting even if you select
[Auto].
LCD Brightness
Viewfinder Bright.