Sony DSC-P8 - Manual (Page 104)

104
SET UP items
Set the mode dial to SET UP. The SET UP
screen appears.
Factory settings are indicated with x.
(Camera 1) (DSC-P10/P12)/ (Camera) (DSC-P8)
(Camera 2) (DSC-P10/P12 only)
Item Setting Description
Moving Image x MPEG Movie / Clip Motion /
Multi Burst
Selects the shooting mode (pages 51, 52 and 68).
AF Mode x Single / Monitor / Cont Selects the focus operation mode (page 43).
Smart Zoom x On / Off Selects whether to use the smart zoom (page 23).
Date/time Day&Time / Date / x Off Selects whether to insert the date and time into the image (page 29). When shooting
movies (MPEG Movie), or images recorded in Clip Motion/Multi Burst modes, the
date and time cannot be inserted in the image. Also, the date and time will not be
displayed when shooting. The date and time will be displayed when the image is
played back.
Red Eye Reduction On / x Off Reduces the red-eye phenomenon when using a flash (page 27).
AF Illuminator x Auto / Off Selects whether to emit an AF assist light in the dark. Helps when it is hard to focus
on the subject under dark lighting (page 27).
Item Setting Description
Bracket Step ±1.0EV / x±0.7EV / ±0.3EV Sets the exposure compensation value when recording three images with each
sxposure value shifted (page 48).
1
2