Switching the output between, The headphones and built-in speakers – Sony NWZ-S544 User Manual
Page 7
ModelName: Flamingo_E
PartNumber: 4-154-416-11(1)
Basic Operations and Screens
Switching the output between the headphones and built-in speakers
You can switch the output between the headphones and the built-in speakers
by sliding the output switch. You can adjust the volume of sound from the
headphones and the built-in speakers respectively.
Note
When you switch the output to the built-in speakers, the output sound is not turned up
at once.
Do not place credit cards or ATM cards, etc. (magnetic coded cards) near the holes of
built-in speakers, as damage to the magnetic coding on the cards may result.
Set the output switch to (speaker) or (headphones).
Press the VOL +/- button to adjust the volume.
The volume indicator appears on the screen. The (headphones) or
(speaker) icon (depending on the current setting) is displayed to the left of
the volume indicator.
Hint
You can set [Built-in SP Optimizer] to output sound from the built-in speakers (
p. 49).
Output switch
Table of
Cont
ents
Home
Menu
Inde
x