Sony NWZ-S544 - Manual (Page 25)

ModelName: Flamingo_E
PartNumber: 4-154-416-11(1)
  Transferring Music
Transferring Music
You can use Windows Media Player 11 to transfer music from your computer
to the player.
Note
 Do not disconnect the USB cable while [Do not disconnect.] appears on the player, as
the data being transferred may be damaged.
 If Content Transfer starts automatically after connecting the player to your computer
using the supplied USB cable, close or ignore Content Transfer as Content Transfer need
not be used. For details on setting automatic start of Content Transfer, refer to the Help
of Content Transfer.

Start up Windows Media Player 11, and then connect the player to
your computer using the supplied USB cable.
Insert the connector of the USB cable into the player with the mark
facing up.
The [Device Setup] window appears.

Click [Cancel].
Close the auto play window, if it appears, by clicking [Cancel] or the Close
icon.

If you click [Finish] instead of [Cancel], the entire library data of
Windows Media Player is automatically copied to the player. If the
library data size is larger than the available storage space on the player,
the copy process will not start.
 You can open the [Device Setup] window at any time. To open it, right-
click [WALKMAN] on the left side of the Windows Media Player
window, and then click [Set Up Sync].
Continued 
Table of
Cont
ents
Home
Menu
Inde
x