Sony VGN-A170 - Manual (Page 17)

Using the S1 button
As a shortcut, you can assign a pre-programmable S1 button to enter a power saving mode, switch between displays, or
launch an application.
To assign a function to a programmable button
1. Click Start , and point to All Programs and then Sony Notebook Setup .
2. From the Sony Notebook Setup submenu, click Sony Notebook Setup .
You can also click the S1 button on the computer to launch Sony Notebook Setup.
3. Click the S1 Button tab.
Sony Notebook Setup
4. Click to select a key assignment from the S1 drop-down menu.
5. Click Apply .
6. Depending on the key assignment, you may be able to customize the S1 button further by clicking Advanced , if it
becomes available, in the Current Settings box.
Page 17