Sony VGNZ890H User Manual
Page 95
95
Using Peripheral Devices >
Connecting an External Display
To connect a computer display or a projector
!
The monitor port on your computer is not accessible when the computer is attached to the docking station.
The HDMI output port on your computer and the DVI-D port on the docking station are functional only while your computer is in SPEED mode.
If you connect an HDMI cable to the HDMI output port on your computer or a display cable to the DVI-D port on the docking station while your computer
is in STAMINA mode, a confirmation window appears. Follow the on-screen instructions to change the performance mode to SPEED mode.
1
Plug the power cord (1) of your external display or the projector into the AC outlet.
2
Connect the external display or the projector to the monitor port (2) on the computer or the docking station with a display
cable (3).
✍
If necessary, connect the headphones jack on the projector and the headphones jack (4) i on the computer with a speaker cable (5).