Sony SVE14A25CXH - Manual (Page 187)

VAIO User Guide Back | Back to Top
Troubleshooting
How to Use
Windows 8: The Basics
Parts Description
Setup
Network / Internet
Connections
Settings
Playback
Backup / Recovery
Security
Other Operations
Notifications
Installing/Removing the Battery Pack
Install the battery pack into the battery compartment on the bottom of your VAIO computer.
To install the battery pack
1. Turn off your VAIO computer, disconnect the power cord and all connection cables,
and close the LCD screen lid.
2. Slide the battery LOCK switch (1) to the unlock position.
3. Slide the battery pack diagonally into the battery compartment until the projection (1)
on each side of the battery compartment fits into the groove (2) on each side of the
battery pack.
4. Turn the battery pack in the direction of the arrow and push the battery pack down into
the compartment until it clicks into place.
5. Slide the battery LOCK switch to the LOCK position to secure the battery pack on
your VAIO computer.
Note
Make sure the battery
LOCK switch is in the LOCK position before using your VAIO
computer. Using the computer without locking the battery pack securely may cause the
following: the battery pack comes away or the computer does not turn on or suddenly
187
Search