Sony KDL-40XBR9 - Manual (Page 83)

Operating the TV > Programming the Remote Control > Programming Other Equipment
Programming Other Equipment
Follow the steps below to program your TV remote control.
Confirm the Programming
If you can turn your equipment on and off using the green POWER button, the programming is
complete. If not, try the next code listed.
1) Find the code that corresponds to your equipment here . If more than one code is provided, try
programming the first code listed.
2) Press and hold DVD, AMP or STB simultaneously with the INPUT button and release. When in the
programming mode, the FUNCTION button blinks for approximately 30 seconds until a code is
entered.
3) Enter the five digit code using 0-9 while the FUNCTION button is lit. If the code is not entered within
30 seconds, you must repeat step 2.
4) Press or ENT to confirm the code. If successfully programmed, the FUNCTION button blinks
twice; if not, it blinks five times.
„ Any of the FUNCTION buttons can be programmed to operate other equipment regardless of the
labeling. For example, DVD can be programmed to operate a Blu-ray Disc player.
„ In some cases, you may not be able to program your remote control. If this is the case, use your
equipment’s own remote control.
Back to Programming the Remote Control Next to Remote Control Backlight
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Getting Started Operating the TV Exploring Fun Features TV Home Menu Other Information Specifications