Sony PCG-FX210 - Manual (Page 113)

Using Your Recovery CDs
113
To use the System Recovery CD(s)
1 Insert the Sony System Recovery CD in the optical drive.
2 Shut down your computer as described in “Shutting Down Your Computer” .
3 Wait four seconds and turn on your computer.
4 Click OK to signify you have read and accept the Microsoft End-User
License Agreement.
5 When the System Recovery menu appears, follow the on-screen instructions
to complete the recovery process.
If your computer does not start from the Recovery CD
1 Press the power button and hold it for more than four seconds to turn off the
computer.
2 Turn on the computer. When the Sony logo is displayed, press the F2 key.
The BIOS setup menu screen appears.
3 Press the arrow keys to select the Exit menu.
4 Press the arrow keys to select “Get Default Values” and then press the Enter
key. The message “Load default configuration now?” appears.
5 Check that “Yes” is selected, then press the Enter key.
6 Press the arrow keys to select “Exit” (Save Changes) and then press the Enter
key. The message “Save configuration changes and exit now?” appears.
7 Check that “Yes” is selected, then press the Enter key. The computer restarts
from the Recovery CD.
Full Restore with Format removes all the information on the hard disk drive.
You will lose any software you have installed and any other files you have
created since you started to use your computer. This means you will have to
reinstall any applications that were not included with the computer when you
purchased it. If you have any questions on using the System Recovery CD,
contact Sony Customer Support.