Adding and removing memory modules, User guide, How to use – Sony Vaio SVF1421 User Manual

Page 242: Troubleshooting list of topics, Vaio fit 14e/15e

Advertising
background image

User Guide

How to Use

Windows 8: The Basics

Parts Description

Setup

Network / Internet

Connections

Settings

Playback

Backup / Recovery

Security

Other Operations

Notifications

Troubleshooting

List of Topics

Print

Personal Computer

VAIO Fit 14E/15E

SVF1421/SVF1521

Adding and Removing Memory Modules

If you want to increase your computer’s speed or improve performance when
running programs simultaneously, increase the amount of memory by installing
optional memory modules.
Before you upgrade your computer’s memory, see

Notes on Adding and Removing

Memory Modules

.

If you install memory modules into two or more slots, the dual-channel mode is
enabled to help improve performance.
The type of module and the amount of memory installed on your computer may
differ depending on the model.

1. Turn off your VAIO computer and peripheral devices, disconnect the power cord

and all connection cables, and remove the battery pack.
See

Removing the Battery Pack

for information on how to remove the battery

pack.

2. Wait for a while until your VAIO computer cools down.

The inner parts of your VAIO computer may be hot just after turning off. Be
careful to avoid burns while handling your VAIO computer in this state.

3. Lay a clean cloth on a level, flat surface, place your VAIO computer on it as

illustrated below. Remove the screws with a cross slot screwdriver to open the
memory module compartment cover.
The screw locations are indicated by the arrows in the illustration below.
On some models, captive screws are used on the memory module compartment
cover and cannot be detached from the cover.

A protective sheet covers the memory module under the cover. Lift the sheet
when installing/removing the memory module.
Be careful not to lift the sheet so much that it is detached or folded back.

4. Touch an external metal object to discharge static electricity.

Do not touch any metal parts inside your VAIO computer.

5. If there is no free slot, remove the currently installed memory module. Pull the

latches in the direction of the arrows to pop up the module at an angle (1),
then pull the module out in the direction of the arrow (2).

6. Remove the new memory module from its antistatic bag.

Back Back to Top

242

Search

Advertising
This manual is related to the following products: