Sony SVF1432ACXW User Manual
Page 257
6. Remove the new memory module from its antistatic bag.
7. Hold the memory module by its edge and slide it into the memory module slot with its end terminal facing downward
while aligning the notch on the module with the small projection in the slot.
8. Hold the memory module by its edge and push in until it clicks into place as shown in the illustration.
The latches on both sides of the slot snap into place to secure the module. Do not touch any ICs (black
components) on the memory module.
9. Replace the memory module compartment cover and secure it with the screws you removed in step 3.
10. Install the battery pack and connect all connection cables and peripherals that you removed in step 1, and turn on
the computer.
11. Check that the amount of system memory has correctly changed.
If the amount of indicated system memory is correct, memory module installation was successful.
To check the system information, see
Viewing the System Information
Related Topic
Notes on Adding and Removing Memory Modules
Copyright 2013 Sony Corporation
257