Sony PCG-VX89P - Manual (Page 107)

Using Computer Monitors and Projectors
107
Connecting a projector
You can use a projector to display the actions and images on your computer’s
LCD screen.
To connect a projector
1 Plug the projector into an AC outlet.
2 Turn off the computer.
3 Plug the display cable connector into the Monitor (VGA) port on the
computer.
4 Plug the other end of the display cable into the projector.
5 Plug the audio cable connector into the Headphone jack on the computer.
6 Plug the other end of the audio cable into the projector.
7 Turn on the projector (if it is not already on), and then turn on the computer.
Connecting a Computer Monitor
Computer monitor
Power cord
Display cable (not supplied)
Monitor
port
(VGA)