Sony XAV-622 - Manual (Page 50)

50
* When a device is connected to AUX/BUS IN, “Sony BUS Input” appears instead of “Rear AUX Input,” and only
options “Video” and “Audio” are selectable.
Item Option Purpose Unit status
Rotary Commander
Changes the operative
direction of rotary commander
controls.
Default (z) To use in the factory-set
position.
Any status
Reverse To use on the right side of
the steering column.
Front AUX Input (page 57)
Sets whether or not an audio
device’s input signals are
detected via the front AUX
input.
Audio (z) To activate the AUX input.
No source
selected
OFF To deactivate the AUX
input.
Rear AUX Input* (page 57)
Sets the type of device
connected to the rear AUX
terminals to switch the
background screen
accordingly.
Video (z) To display the picture from
the connected device.
No source
selected Audio To display this unit’s
background screen.
OFF To deactivate the AUX
input.
No Signal
Changes the screen
automatically when no
external video signal is
detected.
Through To display the no signal
screen.
No source
selected
Blank (z) To display the audio
playback screen with no
signal notification.
Camera Input
Activates the video input from
the connected rear view
camera.
OFF To deactivate the input.
Any status
ON (z) To display the picture from
the rear view camera when
the back lamp lights up (or
the shift lever is set to the R
(reverse) position).
Rear View Camera Setting
(page 59) – –
Any status