Sony XAV-622 - Manual (Page 64)

64
Specifications
Monitor section
Display type: Wide LCD color monitor
Dimensions: 6.1 in
System: TFT active matrix
Number of pixels:
1,152,000 pixels (800
× 3 (RGB) × 480)
Color system:
PAL/NTSC/SECAM/PAL-M automatic select
Tuner section
FM
Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation: 40 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Sensitivity: 26 µV
DVD/CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Harmonic distortion: 0.01%
Region code: Labeled on the bottom of the unit
USB Player section
Interface: USB (Full-speed)
Maximum current: 500 mA
Wireless Communication* 1
Communication System:
Bluetooth Standard version 2.0 + EDR
Output:
Bluetooth Standard Power Class 2 (Max. +4 dBm)
Maximum communication range:
Line of sight approx. 10 m (33 ft)* 2
Frequency band:
2.4 GHz band (2.4000 – 2.4835 GHz)
Modulation method: FHSS
Compatible Bluetooth Profiles*
3 :
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile) 1.3
HFP (Handsfree Profile) 1.5
PBAP (Phone Book Access Profile)
OPP (Object Push Profile)
*1 Applies to XAV-62BT only.
*2 The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
reception sensitivity, antenna’s performance,
operating system, software application, etc.
*3 Bluetooth standard profiles indicate the purpose of
Bluetooth communication between devices.
Power amplifier section
Outputs: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W
× 4 (at 4 ohms)
General
Outputs:
Video output terminal (rear)
Audio output terminals (rear/sub switchable)
Power antenna (aerial) relay control terminal
Power amplifier control terminal
Inputs:
Telephone ATT control terminal
Illumination control terminal
BUS control input terminal
Remote controller input terminal
Antenna (aerial) input terminal
Parking break control terminal
Microphone input terminal (XAV-62BT only)
Reverse input terminal
Camera input terminal
AUX audio input terminals (front/rear)
AUX video input terminal
USB signal input connector
Power requirements: 12 V DC car battery
(negative ground (earth))
Dimensions: Approx. 178
Ч 100 Ч 170 mm
(7
1
/ 8
Ч 4 Ч 6 3
/ 4 in) (w/h/d)
Mounting dimensions: Approx. 182
Ч 111 Ч 164 mm
(7
1
/ 4
Ч 4 3
/ 8
Ч 6 1
/ 2 in) (w/h/d)
Mass: Approx. 1.9 kg (4 lb 3 oz)
Supplied accessories:
Parts for installation and connections (1 set)
Microphone (XAV-62BT only)
CD-ROM (Application disc)
Optional accessories/equipment:
Remote Commander: RM-X170
Mobile monitor: XVM-B62
BUS cable (supplied with an RCA pin cord):
RC-61 (1 m), RC-62 (2 m)
USB and Video connection cable for iPod:
RC-202IPV, RC-200IPV
HD Radio™ tuner: XT-100HD
Rear View Camera: XA-R800C
FOR UNITED STATES CUSTOMERS. NOT
APPLICABLE IN CANADA, INCLUDING
IN THE PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX
ÉTATS-UNIS. NON APPLICABLE AU
CANADA, Y COMPRIS LA PROVINCE DE
QUÉBEC.
CEA2006 Standard
Power Output: 17 Watts RMS
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
AUDIO POWER SPECIFICATIONS
4 at