Sony KDL-26M4000 User Manual
Page 13
13
Gettin
g
Starte
d
Item
Description
1
HDMI IN 1/2
R-AUDIO-L
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment, such
as DVD player, a set-top box, A/V receiver and Blu-ray Disc player as well as PC. HDMI
supports enhanced or high-definition video plus digital audio.
• If the equipment has a DVI and not a HDMI connector, use a DVI-to-HDMI cable or adapter
to connect the DVI output to either HDMI IN 1 or HDMI IN 2 input, and connect the audio
jacks to the AUDIO (L/R) jacks below the HDMI IN 2. (DVI connector is for video signals
only, the Audio jacks provide support for the audio.)
• For better PC view, use the PC IN (RGB IN) input.
• HDMI connection is necessary to view 480i, 480p, 720p, and 1080i formats. Note that this
TV displays all video input signals in a resolution of 1,366 dots × 768 lines.
2
SERVICE ONLY This USB port is for service only.
3
VIDEO IN 1
S VIDEO
Connects to the S VIDEO output jack of your DVD or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than composite video (4). S VIDEO
does not provide sound, you need to connect the audio cables.
4
VIDEO IN 1/
VIDEO/
L(MONO)-
AUDIO-R
Connects to the composite video and audio output jacks on your A/V equipment such as a
DVD player or other video equipment. A second composite video and audio (VIDEO IN 2)
input is located on the left side panel of the TV.
5
COMPONENT
IN 1/2
(1080i/720p/
480p/480i)/
L-AUDIO-R
Connects to your DVD player’s or digital set-top box’s component video (YP
B
P
R
) and audio
(L/R) jacks. Component video provides better picture quality than the S VIDEO (3) or the
composite video (4) connections.
6
PC IN
(RGB/AUDIO)
Connects to a personal computer’s video output connector using HD15-HD15 cable (analog
RGB, not supplied).
See “PC Input Signal Reference Chart” on page 16 for the signals that can be displayed.
• For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied).
If this is the case, connect the adapter to the computer before connecting the HD15-HD15
cable.
7
AUDIO OUT
(FIX) R/L
Connects to the left and right audio input jacks of your audio or video equipment. You can use
these outputs to listen to your TV’s audio through your stereo system.
8
DIGITAL AUDIO
OUT (COAXIAL)
Connects to the coaxial audio input of a digital audio equipment that is PCM/Dolby Digital
compatible.
9
CABLE/
ANTENNA
RF input that connects to your cable or VHF/UHF antenna.
• Component video (YP
B
P
R
) or HDMI connection are necessary to view 480i, 480p, 720p, and 1080i formats. Note that
this TV displays all format types of picture in its native resolution of 1,366 dots × 768 lines.
DVI-to-HDMI cable
DVI-to-HDMI adapter
Audio cable