Sony HT-DDW750 - Manual (Page 48)

HT-DDW750 4-244-183-11(1) GB
48
GB
Specifications (continued)
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Intermediate Frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf, 2.2 µV/75 ohms
Stereo: 38.3 dBf, 22.5 µV/75 ohms
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono:
76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code U, CA
With 10-kHz tuning scale: 530 – 1710 kHz
5)
With 9-kHz tuning scale: 531 – 1710 kHz 5)
Models of area code E2/E3
With 10-kHz tuning scale: 530 – 1610 kHz
5)
With 9-kHz tuning scale: 531 – 1602 kHz 5)
Models of area code CEL, CEK, SP, AU
With 9-kHz tuning scale: 531 – 1602 kHz
Models of area code MX
With 10-kHz tuning scale: 530 – 1610 kHz
Antenna Loop antenna
Intermediate Frequency
450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz: 40 dB
5) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press ?/1. All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video:
1 Vp-p, 75 ohms
Outputs
Video:
1 Vp-p, 75 ohms
General
Power requirements
Area code Power requirements
U, CA, MX 120 V AC, 60 Hz
CEL, CEK 230 V AC, 50/60 Hz
SP 220 – 230 V AC, 50/60 Hz
E2/E3 120/220/240 V AC, 50/60 Hz
AU 240 V AC, 50Hz
Power consumption
Area code Power consumption
U, MX 185 W
CA 270 VA
CEL, CEK, SP, AU 180 W
E2/E3 190 W
Power consumption (during standby mode)
0.3 W
Dimensions 430
Ч 145 Ч 298 mm
(16 7/8
Ч 5 6/8 Ч 11 6/8
inches) including
projecting parts and
controls
Mass (Approx.) 7.2 kg (15 lb 14 oz)
01GB10ADDCA.p65 11/29/02, 2:24 PM 48