How to use, Search – Sony SVS1512GPXB User Manual
Page 253
VAIO User Guide
Back
|
How to Use
Notes on Fingerprint Authentication
<Fingerprint sensor equipped models>
General notes on fingerprint authentication
The fingerprint authentication technology does not ensure complete user authentication
or complete protection of your data and hardware. Sony assumes no liability for any
problems and damages arising out of your use of or inability to use the fingerprint
sensor.
The fingerprint recognition rate depends on your operating conditions and varies among
individuals as well.
In case the built-in storage device has to be initialized, for example after the repair work,
the fingerprint templates will be lost. You will have to register them all over again.
The maintenance and management of data concerning fingerprint authentication must
be carried out at your own risk. Sony assumes no liability for any defects arising out of
your data maintenance and management.
A fingerprint sensor may malfunction or be damaged if you scratch its surface with:
A solid or sharp-pointed object
Fine objects, for example swiping a finger covered with dirt across the fingerprint
sensor
Discharge static electricity from your finger by touching a metallic object especially
during dry seasons (e.g. winter) before scanning your fingerprint. Static electricity may
cause the fingerprint sensor to malfunction.
Notes on registering/authenticating fingerprints
Fingerprint registration/authentication may fail due to the following hand conditions.
If you have difficulty registering/authenticating fingerprints, try using different fingers or
washing your hands. The clean fingers may improve the fingerprint recognition rate.
Too dry
Oily, sweaty, or wet
Wrinkled after a bath
Rough or injured (e.g. a cut)
Dirty
Thin skin, wrinkled skin, etc.
The fingerprint recognition rate may be reduced due to fingerprints or dust on the
fingerprint sensor. Clean the sensor before registering/authenticating fingerprints.
© 2012 Sony Corporation
253
Search