Sony SDM-P234 - Manual (Page 14)

14
3 Touch m / M to select “ 0 MODE RESET” and touch
OK.
The “RESET” menu appears on the screen.
4 Touch m / M to select the desired mode and touch OK.
• OK : To reset all of the adjustment data in the
PICTURE ADJUST menu to the default settings.
• CANCEL :To cancel resetting and return to the PICTURE
ADJUST menu.
x Adjusting the SMOOTHING
If the picture displayed at the FULL2 or FULL1 mode of
ZOOM is not smooth, use the picture smoothing function.
1 Touch MENU.
The main menu appears on the screen.
2 Touch m / M to select (PICTURE ADJUST) and
touch OK.
The PICTURE ADJUST menu appears on the screen.
3 Touch m / M to select “SMOOTHING” and touch OK.
The SMOOTHING menu appears on the screen.
4 Touch m / M to select the desired mode.
The smoothing effect becomes stronger in the order of
TEXT
t STANDARD t GRAPHICS.
• TEXT : To make the characters appear clear. (This mode is
suited for text-based applications.)
• STANDARD (The default setting) : Standard smoothing
effect.
• GRAPHICS : To make the pictures appear clean. (This
mode is suited for CD-ROM software such as
photo images or illustrations.)
Note
• When you set the (ZOOM) menu to REAL, the SMOOTHING
menu is not available.
• 1920
×
1200 resolution signals are shown only in REAL mode and
SMOOTHING is not possible.
SCREEN menu (analog RGB
signal only)
You can adjust the following items using the SCREEN menu.
• AUTO
• PHASE
• PITCH
• H CENTER
• V CENTER
x Automatic picture quality adjustment
function
When the monitor receives an input signal, it automatically
adjusts the picture’s position and sharpness (phase/pitch), and
ensures that a clear picture appears on the screen (page 20).
Note
While the automatic picture quality adjustment function is activated, only
1 (power) will operate.
If the automatic picture quality adjustment function of this
monitor seems not to completely adjust the picture
You can make further automatic adjustment of the picture quality for the
current input signal. Adjust by touching OK on the front of the monitor
(one touch sensing function), or following the steps in “AUTO” below.
If you still need to make further adjustments to the picture
quality
You can manually adjust the picture’s sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the monitor receives a previously input and
registered input signal.
x Make further automatic adjustments to the
picture quality for the current input signal
(AUTO)
1 Touch MENU.
The main menu appears on the screen.
2 Touch m / M to select (SCREEN) and touch OK.
The SCREEN menu appears on the screen.
3 Touch m / M to select “AUTO” and touch OK.
Make the appropriate adjustments of the screen’s phase, pitch
and horizontal/vertical position for the current input signal
and store them.
x Adjust the picture’s sharpness manually
(Phase/Pitch)
You can adjust the picture’s sharpness as follows. This
adjustment is effective when the computer is connected to the
monitor’s HD15 input connector (analog RGB).
1 Set the resolution to 1920
×
1200 on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4 Touch MENU.
The main menu appears on the screen.
5 Touch m / M to select (SCREEN) and touch OK.
The SCREEN menu appears on the screen.
Note
When receiving digital RGB signals from the DVI-D input connector
for INPUT3, adjustment is unnecessary.
1 9 2 0 1 2 0 0 6 0 H z x /
E X I T
AU TO
P H A S E
P T C H
H C E N T E R
V C E N T E R
S C R E E N
I