Sony KDL-40VL160 - Manual (Page 17)

17
G
e
tting Started
s To Display TV Guide On Screen
Press GUIDE.
s To Run Initial Setup Again or Auto
Program at a Later Time
Select the Initial Setup feature from the XMB
™
or perform the steps described in the Initial
Setup section on page 53. To run Auto
Program, see page 47.
s To Add Digital Channels
Use the Add Digital Channels feature as
described on page 47. (Useful for antenna
installations.)
~
• If you accidentally turn off the TV during the Initial
Setup process, the Initial Setup will restart from the
beginning when the TV is turned back on.
• Auto Program may be canceled while the channels
are being scanned. Press RETURN first, then press
either
B/b on the remote control. Select Yes to cancel
or No to resume Auto Program.
HDMI Settings
General Setup
Initial Setup
Settings
TV