Sony PEG-NX80V - Manual (Page 45)

45
T
rou
bl
e
s
ho
o
ti
n
g
Other problems
After I connect to the computer, the drive is recognized
but the contents cannot be found
B Reconnect your CLIÉ handheld to your computer after inserting “Memory
Stick” media.
Operation becomes unstable when connected to my
computer
B If you connect the cradle to your computer via a USB hub or extension
USB cable, you may not be able operate your CLIÉ handheld properly.
Make sure you connect the cradle directly to a USB port of your computer.
The error message “Unsafe Removal of Device” is suddenly
displayed on my computer screen
B Do not remove the CLIÉ handheld from the cradle or tap Exit during check
in/check out (sending music).
My CLIÉ handheld does not produce any sound
B If you connect the headphones to your CLIÉ handheld, the system sound
of your CLIÉ handheld, the alarm sound and the game sound can be heard
only through the headphones.
B Check that the volume is not set to the Muting mode.
“Memory Stick” media cannot be inserted
B Insert the “Memory Stick” media in the correct direction.
b For details, refer to “CLIÉ ™ handheld components: Using “Memory Stick”
media” in the “Read This First (Operating Instructions).”
Continued on next page
• • • • • • • • • • • • • • • • • • • •