Sony KDL-32XBR9 - Manual (Page 6)

Getting Started > Installing the TV > Preparation for a Table-Top Stand
Preparation for a Table-Top Stand
Follow the assembling steps required to place on a TV stand (except model, KDL-52V5100).
1) Remove the Table-Top Stand from the carton and the four screws from the bag attached to the Table-
Top Stand. For product protection and safety reasons, Sony strongly recommends that you use the
screws provided with the TV.
2) Place the Table-Top Stand on a level and stable surface.
3) Gently slide the TV unit onto the neck of the Table-Top Stand and align the screw holes.
 Do not put stress on the LCD panel or the frame around the screen.
 Be careful to not pinch your hands or the AC power cord when you install the TV unit to the Table-
Top Stand.
4) Use the supplied screws to attach the TV unit to the Table-Top Stand (refer to the “Attaching the Table-
Top Stand” flyer). If an electric screwdriver is used, set the torque to tighten at approximately 1.5
N·m, 15 Kgf·cm.
Back to Carrying the TV Next to Preparation for Wall-Mount Bracket
Home | Getting Started | Operating the TV | Using Features | Using the Menus | Other Information | Specifications
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Getting Started Operating the TV Using Features Using the Menus Other Information Specifications