Connecting two vcrs for tape editing, 11 connecting two vcrs for tape editing – Sony wega KV-36FS16 User Manual
Page 17
Installing the TV
11
Connecting Two VCRs for Tape Editing
If you connect two VCRs, you can use the TV’s MONITOR OUT
feature to perform tape-to-tape editing. In the connection shown
below, the TV functions as a monitor and sends the program being
played by the playback VCR to the recording VCR.
1
Connect the VCR intended for playback using the connection
instructions on page 10 of this manual.
2
Using A/V connectors, connect AUDIO and VIDEO IN on the
VCR intended for recording to MONITOR AUDIO and VIDEO
OUT on your TV.
✍
This connection applies to all models except KV-36FS12 and 36FS16.
✍
You cannot record signals from equipment connected to the Y, P
B
, P
R
input.
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VCR (recording)
VCR (playback)
TV
A/V cable
A/V cable
✍
To perform tape editing, set the TV to the video input intended for playback by pressing
the TV/VIDEO button on the remote control.