Sony wega KV-36FS16 - Manual (Page 24)

Installing the TV
18
Using the CONTROL S Feature
CONTROL S allows you to control your TV system and other Sony
equipment with one remote control.
To control your other Sony equipment with your TV’s remote control,
use a CONTROL S cable (not supplied) to connect the equipment’s
CONTROL S IN jack to the TV’s CONTROL S OUT jack.
Setting Up the TV Automatically
After you finish connecting your TV, you need to run Auto Setup to
set up your channels.
Using Auto Setup 1 Press POWER to turn on the TV.
The first time you turn on the TV, the Auto Setup screen appears.
2 Press CH+ to run Auto Setup or press CH– to exit.
✍
This CONTROL S feature applies to all models except KV-36FS12 and 36FS16.
TV
✍
The Auto Setup feature does not apply for installations that use a cable box for all
channel selection.
✍
You can run Auto Program again by selecting it in the Channel menu, as described on
page 29.
To reset your TV to factory settings, turn the TV on. Then, while pressing the RESET
button on the remote control, press the POWER button on the TV. The TV will turn itself
off, then back on.
z