Sony wega KV-36FS16 - Manual (Page 9)

Introducing the FD Trinitron Wega
3
Using the Remote Control
Inserting Batteries Insert two size AA (R6) batteries (supplied) by matching the + and –
on the batteries to the diagram inside the battery compartment.
Remote Control
Overview Here’s an overview of the buttons on the remote control you will
probably use most often. For a complete description of the remote
control, see “Using the Remote Control” on page 40.
✍
Remove the batteries to avoid damage from possible battery leakage whenever you
anticipate that the remote control will not be used for an extended period.
Handle the remote control with care. Avoid dropping it, getting it wet, or placing it in
direct sunlight, near a heater, or where the humidity is high.
To Do This ... Use This Button
Turn the TV
on and off TV (POWER)
Select channels
directly 0 - 9 and ENTER
Press 0 - 9 to select a channel, the channel changes
after 2 seconds. Press ENTER for immediate selection.
Scan through
channels CH +/-
Adjust the volume VOL +/-
Switch video inputs
(such as a VCR) TV/VIDEO
Press repeatedly to toggle through all video inputs.
Display the Menu to
make changes to the
TV MENU
For details, see “Using the Menus” on page 25.
Using the on-screen
functions
To scan rapidly through the
channels, press and hold down
the CH+ or CH- button.
z
MENU VOL
RESET
CH
VTR 1 2 3 DVD/MDP
Move
Select
Joystick:
(models KV-32FV26,
36FV26 only)
Move
Select
Arrow buttons:
(all models except
KV-32FV26, 36FV26)
CH VOL
RESET MENU
GUIDE TV/SAT