Sony KDL-55BX520 - Manual (Page 48)

48
Step 3: Installing the Base Bracket on the wall
Refer to the Instructions for SU-WL500.
Step 4: Preparing the TV for wall mount installation
Follow the steps below to prepare for installing the TV.
1
Disconnect all the cables from the TV.
2
Secure the Mounting Hook to the rear of the TV.
Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to
the “Screw and Hook Locations Diagram/Table” shown below.
1
Secure the Mounting Hooks to the rear of the TV using only the supplied screws
(M6 × 16).
2 Be sure to tighten the screws with equal torque strength.
Screw and Hook Locations Diagram/Table
TV Model Screw location Hook location
KDL-55BX520 d, g a
Mounting Hook
Screw
(M6 × 16)
Square hole
Square
hole
Align the tab on the rear of the
Mounting Hook with the square
hole on the rear of the TV as
illustrated.
Tab