Sony HDR-PJ710V - Manual (Page 24)


US
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (), and then adjust the angle
().
To turn off the beep sound
Select  [Setup]  [ General Settings]  [ Beep ]  [Off].
Notes
The recording date, time and condition, and coordinates (HDR-CX760V/PJ710V/PJ760V) are recorded
automatically on the recording media. They are not displayed during recording. However, you can
check them as [Data Code] during playback. To display them, select  [Setup]  [ Playback
Settings]  [Data Code]  [Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area
ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to
[Off] (HDR-CX760V/PJ710V/PJ760V).

[Power On By LCD] (HDR-PJ710/PJ710V) (p. 72)
To set the date and time again: [Date & Time Setting] (p. 73)
To calibrate the touch panel: [Calibration] (p. 84)





 90 degrees to the camcorder
 90 degrees (max.)
 180 degrees (max.)