Sony PCG-GRS100 User Manual
Page 163
Connecting the Port Replicator
163
To connect a port replicator
1
Close any active programs to prevent data loss.
2
Turn off the computer, and disconnect all peripheral (attached) devices.
3
Close the tilt stands before you attach the port replicator to the computer.
4
Plug the AC adapter connector into the DC IN jack on the port replicator,
and plug the power cord into the AC adapter and an AC outlet. The power
indicator turns on.
✍
Only the AC adapter supplies power to the port replicator, so the AC adapter must
remain connected to the port replicator at all times while it is in use. If the AC adapter
is disconnected and/or unplugged while using the port replicator, the computer may
malfunction and data may be lost.
Connecting an AC Adapter to a Port Replicator
Power cord
DC IN port
AC adapter