Sony PCG-GRS100 - Manual (Page 130)

VAIO Computer Quick Start
130
Connecting a multimedia computer monitor
A multimedia computer monitor has built-in speakers and/or a microphone
device. Before you can connect your computer to a multimedia computer
monitor, it must have an A/V OUT jack. For more information, see “Locating
Controls and Ports” in the “Setting Up” chapter of your supplied VAIO®
Computer Quick Start guide.
To connect a multimedia computer monitor
1 Plug the multimedia computer monitor into an AC outlet.
2 Turn off your computer.
3 Plug the display cable into the A/V OUT jack on your computer.
4 Plug the other end of the display cable into the multimedia computer
monitor.
5 Turn on the multimedia computer monitor (if it is not already on), and then
turn on your computer.
6 Press the Fn+F7 key combination to toggle the display between your
computer and the monitor. See “Selecting a display mode” for more
information.
Connecting a projector
You can use a projector to display the actions and images on the computer screen
(LCD).
To connect a projector
1 Plug the projector into an AC outlet.
2 Turn off the computer.
3 Plug the display cable into the Monitor (VGA) port on the computer.
4 Plug the other end of the display cable into the projector.
5 Plug the audio cable into the Headphone jack on the computer.
✍
See the guide that came with your multimedia computer monitor for more information
on its installation and use.