If you cannot connect to the internet – Sony KDL-46EX621 User Manual

Page 28

Advertising
background image

28

D:\Cmeng's JOB\SONY TV\SY0404_W9 (Rev-4)\4275462151_US\US05OVR.fm

KDL-EX729/EX723/EX720/EX621/EX620/HX729

4-275-462-15(1)

3

Select Scan, then select a network
from the list of scanned wireless
networks.

4

Follow the instructions on the setup
screen.

~

• If you use WPS for network setup, the security

settings of the wireless LAN router activate,
and any equipment previously connected to the
wireless LAN in a non-secure status will be
disconnected from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect.
Or, you can deactivate the security settings of
the wireless LAN router, and then connect the
equipment to a TV in a non-secure status.

Type 3: Unsecured network
with any type of wireless LAN
router

To set up a wireless LAN, SSID (wireless
network name) will be required.

1

Press HOME, then select

>

Network > Network Setup.

2

Select Wireless Setup.

3

Select Scan, then select a network
from the list of scanned wireless
networks.

4

Follow the instructions on the setup
screen.

~

• Security key (WEP or WPA key) will not be

required because you do not need to select any
security method in this procedure.

Type 4: Wired network setup

Enter the respective alphanumeric values
for your router if necessary. The items that
need to be set (e.g. IP Address, Subnet
Mask, DHCP) may differ depending on the
Internet service provider or router. For
details, refer to the instruction manuals
provided by your Internet service provider,
or those supplied with the router.

1

Press HOME, then select

>

Network > Network Setup.

2

Select Wired Setup.

3

Select Auto to set the IP Address
and proxy server automatically, or
Custom to set them manually.

4

Follow the instructions on the setup
screen.

Viewing the network status

You can confirm your network status.

1

Press HOME, then select

>

Network > Network Setup.

2

Select View Network Status.

If you cannot connect to
the Internet

Use the diagnostic to check possible causes
for network connection failures, and
settings.

1

Press HOME, then select

>

Network > Network Setup.

2

Select View Network Status.

Advertising