Airlink101 ANAS350 - Manual (Page 19)

19
DHCP Client Table: Clicking this button will bring up a list of all DHCP Clients
connected to the NAS device. Note that this option is only applicable if the device is in
Server Mode.
Fixed Mapping: By clicking this button and Enabling the MAC Address Control, the
NAS can be setup to specifically assign an IP address to a certain computer based on
the computers MAC Address. This way the IP address of the computer will never
change, where normally it may change when the computer is powered on/off.
4.3 Setup – System Time
This page is similar to the System Time setting as described in the Setup Wizard in
Section 4.1 Step 4.