Airlink101 ANAS350 - Manual (Page 4)

4
1.3 NAS Diagram
LED Indicators:
LED Light Off Light Solid Blinking
Power No power Device is ON
LAN
No network connection
present
Linked Network Activity
HDD R/W Not in use HDD read/write
HDD Status No HDD HDD full or error
Quickly – Hard Drive
Capacity Low
USB 1 No device attached
USB device connected
and ready
USB 2 No device attached
USB device connected
and ready
Status/Backup
Steady – Normal
operation
Quickly – Backup in
progress
Buttons:
Buttons Description
Shutdown Press and hold for 4 seconds to shut down the Drive before powering off.
Backup
Press and hold for 4 seconds to copy the contents of an attached USB
device to the Hard Drive.
Shutdown + Backup
Press and hold both the “Shutdown” and “Backup” buttons
simultaneously for 6 seconds to reset the device to factory default
settings.
On/Off switch(in back) Powers down the device.