Sony MVC-CD400 - Manual (Page 88)

model name1[MVC-CD400/CD250]
[3-075-356-12(1)]
88
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\10adv.fm]
masterpage:Left
To cancel the slide show setting
Select [CANCEL], then press z in step 3.
To stop slide show playback
Press z, select [EXIT] with B, then press
z again.
To skip to the next/previous
image during the slide show
Press B (next) or b (previous).
• The interval setting time may vary depending
on the image size.
Rotating still images
Mode dial:
You can rotate image recorded in portrait
orientation and display it in landscape
orientation.
a Set the mode dial to , and
display the image to rotate.
b Press MENU.
The menu appears.
c Select [ROTATE] with b / B ,
then press z .
d Select or with v / V , then
rotate the image with b / B .
e Select [OK] with v / V , then
press z .
To cancel rotation
Select [CANCEL] in step 4, then press z.
• You cannot rotate protected images (page 89)
and images recorded as movies (MPEG
MOVIE), Clip Motion, Multi Burst or TIFF
images.
• You may not be able to rotate images shot with
other cameras.
• Also, when viewing images on a computer, the
image rotation information may not be
reflected depending on the application
software.
• If you rotate an image, the disc remaining space
will decrease.
• If the disc remaining space is not sufficient, you
may not be able to rotate an image.
Mode dial
Control button
MENU