Sony MVC-CD400 - Manual (Page 92)

model name1[MVC-CD400/CD250]
[3-075-356-12(1)]
92
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\11adv.fm]
masterpage:Left
• If you mark an image shot in TIFF mode with a
print mark, only the uncompressed image is
printed, and the JPEG image recorded at the
same time is not printed.
• If you mark an image with a print mark, the
disc remaining space will decrease. If you
unmark the print mark, the disc remaining
space will also decrease.
• If the disc remaining space is not sufficient, you
may not be able to mark an image with a print
mark.
• Make sure to finalize the disc before having
images printed at a shop (page 44).
In single-image mode
a Set the mode dial to .
b Display the image you want to
print with
b / B .
c Press MENU.
The menu appears.
d Select [PRINT] with b / B , then
press z .
The (print) mark is marked on the
displayed image.
To unmark the print mark
Press z again in step 4. The (print)
mark disappears.
In index (nine-image) mode
a Set the mode dial to , then
press the zoom W button once
to display the index (nine-
image) screen.
b Press MENU.
The menu appears.
c Select [PRINT] with b / B , then
press z .
d Select [SELECT] with b / B ,
then press z .
• When marking print marks, you cannot
select [ALL].
e Select the image you want to
print with
v / V / b / B , then press
z .
The (print) mark appears on the
selected image.
f Repeat step 5 to print other
images.
5/5 640
OK
DELETE PROTECT PRINT
60min
SLIDE
TO NEXT MENU • SET