Pointing device – Sony VGN-UX380N User Manual
Page 179
179
Troubleshooting
Pointing Device
What should I do if my pointing device does not work?
❑
Check if the power switch is in the HOLD position. If so, slide up the power switch (in the direction of
f
on the switch) to
release the switch.
❑
You may have disabled the pointing device without connecting a mouse to your computer.
❑
Make sure that a mouse is not connected to your computer.
❑
If the pointer does not move while a software application is running, press the Alt+Fn+F4 keys to close the application
window.
❑
If the Alt+Fn+F4 keys do not work, click Start, the arrow next to the Lock button, and Restart to restart your computer.
❑
If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and
Restart.
If the Windows Security window appears, click Restart.
❑
If this procedure does not work, slide up (in the direction of
f
on the switch) and hold the power switch until the computer
turns off.
!
Turning off your computer with the power switch may cause loss of unsaved data.
How do I perform pen operations, such as a pen flick?
Use touch commands. See Using Touch Commands
for more information.