Sony DVP-FX780 - Manual (Page 13)

Se
tti
n
g
s an
d Adj
u
st
m
ent
s
13
Settings and Adjustments
Using the Setup Display
You can change the settings of the player.
The default settings are underlined.
Some discs have stored playback settings,
which take priority.
1
Press OPTIONS when the player
is in stop mode.
During Resume Play, you cannot use
the setup display. Press x twice and
press OPTIONS.
2
Press X/x to select “Setup,”
and press ENTER.
3
Press X/x to select the setup
category and press ENTER.
: General Setup
: Audio Setup
: Language Setup
: Parental Control
4
Select and adjust each of the
following items by pressing X/x
and ENTER.
To turn off the setup display
Press OPTIONS or RETURN.
General Setup
◆ TV Display (DVD only)
◆ Angle Mark (DVD VIDEO only)
Displays the angle mark when you can change
the viewing angles during playback of DVDs
recorded with multi-angles.
Select “On” or “Off.”
◆ Screen Saver
The screen saver image appears. For this
function, see page 9.
Select “On” or “Off.”
4:3
Pan Scan Select this when you connect
a 4:3 screen TV.
Automatically displays a
wide picture on the entire
screen and cuts off the
portions that do not fit.
4:3
Letter Box Select this when you connect
a 4:3 screen TV. Displays a
wide picture with bands on
the upper and lower portions
of the screen.
16:9 Select this when you connect
a wide-screen TV or a TV
with a wide mode function.
,continued