Sony SVT11213CXB User Manual
Page 239
charging?
Make sure that the USB Charging setting is enabled. See
for more
information.
Why do sound interruptions and/or dropped frames occur when I play high-definition videos,
such as those recorded with the AVCHD digital video camcorder?
Playing high-definition videos requires substantial hardware resources, such as CPU, GPU, or
system memory performance on your VAIO computer. During the video playback, some
operations and/or functions may become unavailable, and sound interruptions, dropped
frames, and playback failure may occur depending on the configuration of the computer.
Why is my VAIO computer running slowly and the CPU clock frequency low while the computer
is running on battery power?
While your VAIO computer is running on battery power, the CPU clock frequency is reduced
for power conserving purposes, which causes the computer to run slowly. This is normal and
does not indicate a malfunction.
What should I do if the touch screen does not work correctly? (Touch screen equipped models)
Turn off your VAIO computer, and then turn it on again.
Electromagnetic waves may cause the touch screen to work incorrectly. Try these
suggestions.
Move your VAIO computer away from a fluorescent light or a motor that emits electromagnetic waves.
Connect the AC adapter directly to an AC outlet or use other outlets if you are using a power strip.
Remove any USB device or cable connected to your VAIO computer, if any.
If your AC adapter has a 3-pin plug, make sure it is properly grounded.
What should I do if I cannot use NFC/One-touch functions?
Bring your NFC/One-touch functions supported device toward your VAIO computer as close
as possible.
If the NFC/One-touch functions still do not work, slightly move the device up or down, or
separate the device from the computer for about 10 seconds, and then touch the computer
with the device again.
Make sure that NFC/One-touch functions are enabled on the supported device.
You may need to change the device settings depending on the device you use. For detailed
information, refer to the manual that came with your device.
Enable NFC/One-touch functions.
Open the charms and select the
Settings charm.
Select Change PC settings in the lower-right corner, and select Wireless in the left pane.
Turn off Airplane mode and change the NFC setting under Wireless devices to On.
To open the charms, see
Do not bring metal objects other than devices supported with the NFC/One-touch functions