Self-diagnosis function, Specifications, 22 self-diagnosis function – Sony CPD-G420 User Manual

Page 22

Advertising
background image

22

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the

! (power) indicator will either light up green or

flash orange. If the

! (power) indicator is lit in orange, the

computer is in power saving mode. Try pressing any key on the
keyboard or moving the mouse.

x

x

x

x

If the

!

(power) indicator is green

1

Disconnect any plugs from the video input 1 and 2
connectors, or turn off the connected computer(s).

2

Press the

!

(power) button twice to turn the monitor

off and then on.

3

Hold the control button upward for 2 seconds
before the monitor enters power saving mode.

If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).

If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor’s condition.

x

x

x

x

If the

!

(power) indicator is flashing orange

Press the

!

(power) button twice to turn the monitor off

and then on.

If the

! (power) indicator lights up green, the monitor is working

properly.

If the

! (power) indicator is still flashing, there is a potential

monitor failure. Count the number of seconds between orange
flashes of the

! (power) indicator and inform your authorized

Sony dealer of the monitor’s condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and graphic board.

Specifications

CPD-G520

CRT

0.24 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
FD Trinitron

Viewable image size

Approx. 403.8

×

302.2 mm (w/h)

(16

×

12 inches)

19.8" viewing image

Resolution

Maximum

Horizontal: 2048 dots
Vertical: 1536 lines

Recommended

Horizontal: 1600 dots
Vertical: 1200 lines

Input signal levels

Video signal

Analog RGB: 0.700 Vp-p
(positive), 75

SYNC signal

H/V separate or composite sync:
TTL 2 k

, Polarity free

Sync on Green: 0.3 Vp-p
(negative)

Standard image area

Approx. 388

×

291 mm (w/h)

(15

3

/

8

×

11

1

/

2

inches)

or
Approx. 364

×

291 mm (w/h)

(14

3

/

8

×

11

1

/

2

inches)

Deflection frequency*

Horizontal: 30 to 130 kHz
Vertical: 48 to 170 Hz

AC input voltage/current 100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power consumption

Approx. 135 W (with no USB devices
connected)

Dimensions

Approx. 497

Ч

502

Ч

485 mm (w/h/d)

(19

5

/

8

Ч

19

Ч

18

7

/

8

inches)

Mass

Approx. 30 kg (66 lb 2 oz)

Plug and Play

DDC2B/DDC2Bi, GTF**

Supplied accessories

See page 6

INPUT

PICTURE EFFECT

MENU

OK

1

2

!

(power) indicator

OK

Advertising