Sony DSC-W290 - Manual (Page 26)

26 GB
Selecting a flash mode
• [Flash On] and [Slow Synchro (Flash On)] are not available when the camera is in Intelligent Auto
Adjustment mode.
• You cannot use the flash during burst or bracket shooting.
Changing the screen display
1 Press (Flash) on the control
button, then select the desired
mode with b/B
t z.
(Flash Auto): Flashes when there is
insufficient light or backlight.
(Flash On): Flash always operates.
(Slow Synchro (Flash On)): Flash always operates. The shutter speed is
slow in a dark place to clearly shoot the background that is out of flash light.
(Flash Off): Flash does not operate.
Notes
1 Press DISP (screen display) on the
control button, then select the
desired mode with v/V.
(Bright + Image Only): Sets screen
brighter and displays only images.
(Bright + Histogram): Sets screen
brighter and displays a graph of the image brightness.
(Bright): Sets screen brighter and displays the information.
(Normal): Sets screen to standard brightness and displays the information.
z
Histogram and brightness settings
A histogram is a graph showing the brightness of an image. The graph display indicates a bright
image when skewed to the right side, and a dark image when skewed to the left side.
• If you view images in bright outside light, adjust the screen brightness up. However, the battery
power may decrease faster under such condition.