Sony DSC-TX55 User Manual
Page 64
image composition may fail. In such case, adjust the frame composition so that the section
is in the center of the image, then shoot again.
Notes
If you cannot pan the camera across the entire subject within the given time, a gray area
occurs in the composite image. If this happens, move the camera faster to record a full
panoramic image.
Since several images are stitched together, the stitched part will not be recorded smoothly.
Under low light conditions, panoramic images may be blurred or the shooting may not be
successful.
Under lights that flicker, such as fluorescent lights, the brightness or color of the combined
image will not always be the same.
When the whole angle of panoramic shooting and the AE/AF locked angle are very different
in brightness, color and focus, the shooting will not be successful. If this happens, change
AE/AF locked angle and shoot again.
Sweep Panorama is not suitable for the following situations:
Subjects are too close to the camera
Images with little contrast, such as sky, sandy beach or lawn
Images with constant changes, such as waves or waterfalls
You cannot create panoramic images in the following situations:
You pan the camera too quickly or too slowly.
There is too much camera shake.
You may not be able to set some functions or MENU items depending on the selected REC
mode. For details, see “Functions not available in some REC modes”
and “MENU
items not available in some REC modes.”
Related Topic
Scrolling the panoramic images for display
Still Image Size/Panorama Image Size
Copyright 2011 Sony Corporation
64