Setting the dynamic soundstage organizer (dso), Setting the dynamic soundstage organizer, Dso) – Sony CDX-MP70 User Manual

Page 22

Advertising
background image

22

Sound

• EQ7 Tune (page 23) — to adjust the equalizer

curve.

• HPF (High pass filter) (page 24)
• LPF (Low pass filter) (page 25)
• Loud (Loudness) — to enjoy bass and treble

even at low volumes. The bass and treble will
be reinforced.

• AUX Level (page 26) — to adjust the volume

level of connected auxiliary equipment.

1

Press

(MENU)

.

To set A.Scrl, press (MENU) during CD/MD
playback.

2

Rotate the

.

/

>

control dial until

the desired item appears.

3

Press the –

m

or

M

+ button to

select the desired setting (Example:
“on” or “off”).

4

Press the

.

/

>

control dial.

After the mode setting is completed, the
display returns to normal play mode.

Note
The displayed item will differ depending on the source.

Tip
You can easily switch among categories by pressing

(DISC +)

or

(DISC -)

on the card remote commander

for 2 seconds.

Setting the Dynamic
Soundstage Organizer (DSO)

If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers in the dashboard (virtual
speakers).
You can store the DSO setting for each source.

1

Press

(SOURCE)

to select a source

(radio, CD, MD, or AUX).

2

Press the VOL control dial repeatedly
until “DSO” appears.

3

Rotate the VOL control dial to select
“DSO on” or “DSO off.”

Turn the VOL control dial clockwise for “on,”
and counterclockwise for “off.”
To cancel the DSO function, select “DSO
off.”
After 3 seconds, the display returns to the
normal playback mode.

Notes
Depending on the type of car interior or type of

music, DSO may not have a desirable affect.

If FM broadcasts are difficult to hear, set DSO to off.

.

/

>

control

dial

VOL control dial

Advertising