Sony ICD-BP150VTP - Manual (Page 188)

C H A P T E R 1 5 Using a Handheld Recorder (Preferred edition only)
Dragon NaturallySpeaking User’s Guide 180
Once you have created a user, follow these steps whenever you want to
use your recorder with Dragon NaturallySpeaking
® :
■ Dictate into your recorder
■ Transcribe the recorded dictation
■ Correct mistakes
Installing recorder software
The Sony ® Memory Stick ™ IC recorder ICD-MS, the Sony ® IC recorder
ICD-BP, and the Sony ® ICD-R100 recorder require additional software
to work with Dragon NaturallySpeaking ® .
■ If you are using the Sony ® ICD-BP recorder, you must install the
Digital Voice Editor software.
■ If you are using the Sony ® Memory Stick ™ IC Recorder ICD-MS,
you must install the Sony ® Memory Stick ™ Voice Editor.
■ If you are using the Sony ® ICD-R100 recorder, you must install the
ICD-PCLINK software.
■ If you are using the Dragon NaturallyMobile ™ recorder, you can
install the Voice It ® Link software, which is not required, but can
enhance the recorder’s usability. This software is available on your
Dragon NaturallySpeaking
® CD but it is not automatically installed
when you install Dragon NaturallySpeaking ® .
Use the Voice It ® Link software to perform functions for your Dragon
NaturallyMobile ™ recorder that you can’t perform from the Dragon
NaturallySpeaking ® Transcribe dialog box. Note that for normal
transcription from the Dragon NaturallyMobile ™ recorder, you don’t
need to have this software installed.
To install Voice It Link (for the Dragon
NaturallyMobile recorder):
1 Put the Dragon NaturallySpeaking ® CD in the CD-ROM drive of your
computer.
2 Using Windows ® Explorer, go to the VOICEIT folder of the Dragon
NaturallySpeaking ® CD. The folder is on the top-level directory of the
Dragon NaturallySpeaking ® CD.