Sony DCR-DVD100 - Manual (Page 46)

46
1
Set the mode dial to (Movie).
2
Press SETUP.
3
Select (CAMERA SET) with v/V, then
press ENTER.
4
Select [16:9WIDE] with v/V, then press
ENTER.
5
Select [ON] with v/V, then press ENTER.
6
Press SETUP.
The SETUP display disappear from the
LCD display.
To cancel the wide mode
Set [16:9WIDE] to [OFF] in step 5.
Notes
•You cannot select [OLD MOVIE] during
recording in the wide mode.
•You cannot change a movie recorded in the
16:9WIDE mode to the normal aspect.
Tips
•Pictures recorded in the 16:9WIDE mode
automatically appear on the TV screen at full
size when:
– you connect your camcorder to a TV that is
compatible with the video ID (ID-1/ID-2)
system.
– you connect your camcorder to the S video
jack on the TV.
•The ID-1 system sends aspect ratio (screen
horizontal/vertical ratio) information (16:9,
4:3, or letter box) along with the video
signals.
•The ID-2 system sends a copyright protection
signal with ID-1 signals inserted between
video signals when you connect your
camcorder to other equipment using the A/V
connecting cable.
Shooting techniques to match your circumstances
[ SETUP ] : END
SELFTIMER
D ZOOM
16 : 9WIDE
ON
N. S. LIGHT
RETURN
STEADYSHOT
CAMERA SET
[ SETUP ] : END
PROGRAM AE
P EFFECT
D EFFECT
AUTO SHTR
WHT BAL
MANUAL SET
[ SETUP ] : END
SELFTIMER
D ZOOM
16 : 9WIDE
N. S. LIGHT
RETURN
STEADYSHOT
CAMERA SET
OFF
[ SETUP ] : END
SELFTIMER
D ZOOM
16 : 9WIDE
N. S. LIGHT
RETURN
STEADYSHOT
CAMERA SET
OFF
ON