Sony DCR-DVD100 User Manual

Page 73

Advertising
background image

73

Finalizing a disc for other players

7

Select [YES] with v/V, then press ENTER.
Formatting starts.

8

Press SETUP when the format completion message appears.
The message disappears from the LCD display. The disc is formatted and you
can record on the disc again.

To cancel formatting

Press SETUP in any step from 2 to 6.

Notes
•Power your camcorder from a wall outlet using the AC adaptor.
•If you disconnect the AC adaptor during formatting, the disc may be damaged.
•Do not vibrate your camcorder during formatting.
•You can format DVD-RWs only. You cannot delete any recorded data from DVD-Rs.
•Formatting a finalized disc becomes as following. In both cases, the recorded data are

all deleted.
– In VIDEO mode: unfinalized
– In VR mode: remains finalized
A disc finalized in VR mode cannot be unfinalized by formatting, but still you can
record/edit on the disc.

Tip
It takes about 10 seconds to format a DVD-RW in VIDEO mode, and about 40 seconds
to format a DVD-RW in VR mode.

Recording again on a used disc – Formatting (DVD-RWs only)

EXECUTING

AVOID ANY VIBRATION

FORMAT

0:10

Advertising
This manual is related to the following products: