Sony EBS-N100 User Manual
Page 4
display type and model that you select. To enter the display type and model, perform the following
steps:
• In
the
Device field, select the type of display to which the EBS-N100 is connected.
• In
the
Model field, select the model of the device.
• In
the
Location field, enter the location of the EBS-N100, such as a room number or a
conference room. This information is helpful to identify the EBS-N100 unit.
• Click
the
Submit button. The controls available on the user interface will directly correspond to
the selected display and model
Controlling a Display
Once configured for a particular display device, the EBS-N100 may be used to control display
parameters. An example web page used for display control is shown below. The actual controls
available are dependent upon the particular display model.
Sections in the HTML Control
Main Page
Status Windows
Device (Product Type)
Model (Model of Product)
Location (User defined ID)
IP Address (Network Address)
EBS-N100 Name (User Defined)
Status (Status of Display)
Buttons
Power
Input Selection
Picture Mode (color settings)
Aspect Ratio
Zoom