Sony DCR-TRV39 - Manual (Page 38)

2-4-3 Audio CD Recording Mode
Recording music files
Follow these steps to record music from an audio CD.
The size of recorded sound files is approximately 10MB per minute of CD audio.
1. Insert the music CD in the CD drive.
If the CD plays automatically, stop playback and close the audio software.
2. Select an album.
Designate an album from the album list window into which to save the recorded sound files.
3. In Windows, select the CD drive from the select CD drive menu.
4. Select a track from the track list window.
5. If you wish to record only one portion of a track, cue up the track according to the
instructions below.
To record an entire track, go directly to the next step.
6. Click the [Play] button. Click the [Pause] button at the point you wish to begin
recording.
(Tracks may also be played by double-clicking the track number in the track list window.)
You may also choose to drag the slider to the desired record position.
7. Click the [Record] button.
ImageMixer will begin recording and stop at the end of the track.
To record another track, repeat the process. To stop recording, and thereby record only a portion of the track, see
below.
8. Click the [Stop] button at the point you wish to stop recording.
This step is necessary only if you wish to record a portion of the track.
The audio format of digitally recorded files is PCM, the sampling rate is 44.1KHz, and the bit rate is 16bit stereo.
In Windows, the file type of recorded files is WAVE. In Mac, AIFF files are created. Files are saved in the
save
location designated in the Capturing/Recording Preferences, but are, of course, added directly to the album
selected in step 2. To confirm successful recording of sound files, double-click their thumbnail icon in the
thumbnail list window.
Macintosh
Files are recorded is by dragging & dropping the track number from the track list window to the thumbnail list
window. Tracks are recorded individually.