Sony DCR-TRV820 - Manual (Page 116)

116
Making prints – Standard print
Printing images recorded on “Memory Stick”
Before operation
•Be sure to use a fully charged battery when using the battery to make prints.
•Insert a recorded “Memory Stick” into your camcorder.
(1) Insert the print cartridge. (p. 106)
(2) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(3) Playback the still image you want to print. (p. 91)
(4) Open the LCD panel and the printer cover, then make sure that the PRINT
PAPER lamp is flashing slowly. Insert the print paper. (p. 109)
(5) Press PRINT firmly.
PREPARING appears on the LCD screen.
(6) Printing is started.
The image on the LCD screen disappears.
During printing, PRINT lamp flashes slowly, and the print paper is fed to the
left and right four times.
When printing ends, the image appears on the LCD screen, and the beep
sounds.
(7) When printing ends, draw out the print paper in the direction of the arrow.
Printing the index screen
Display the index screen in step 4. (p. 92)
Printing images recorded on tape
Start from step 1 after capturing the image on “Memory Stick” as a still image.
7
5
PRINT
VTR
OFF
MEMORY CAMERA
(CHARGE
)
2
PREPARING