Sony KDL-52Z5100 - Manual (Page 84)

Operating the TV > Programming the Remote Control > Remote Control Backlight
Remote Control Backlight
The remote control backlight can be set to automatically light up when a button is pressed.
To set auto backlight:
Press LIGHT and MUTING simultaneously until the four FUNCTION buttons blink.
To turn off auto backlight:
Press LIGHT and MUTING simultaneously until the four TV FUNCTION button blink.
To change the backlight timeout:
To reset the remote control to the factory default:
Press SCENE, TV POWER, and simultaneously. The four FUNCTION buttons blink when successfully reset.
1) Press LIGHT, VOL+, and then CH+ simultaneously until one of the FUNCTION buttons blinks.
2) Select the FUNCTION button that corresponds to your preferred time out setting and press
.
Time Out Settings
 5 seconds (default), press DVD button
 10 seconds, press AMP button
 15 seconds, press STB button
 20 seconds, press TV button
Back to Programming Other Equipment Next to Manufacturer's Code List
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Getting Started Operating the TV Exploring Fun Features TV Home Menu Other Information Specifications