Sony PEG-TG50 - Manual (Page 24)

Intellisync Lite
Page 24
• Other Application Wins: Uses PC data when conflicts occur.
Use this option when you’re confident that your PC application
contains the most accurate information.
The Conflict Resolution Dialog Box
When “Notify” is the Conflict Resolution setting, a dialog is presented
each time Intellisync needs help resolving a conflict.
This dialog contains a table containing the conflicting fields from both
systems. The field name is displayed in the left column. The PC field
value is in the center. The handheld value is on the right.
A box labeled “Item” contains key field values. This helps identify the
conflicting record.
If a record in one system conflicts with more than one record in the
other system, a box to the right of the Item box will say 1 of 2, or 1 of
3, etc., and left and right arrow controls will let you switch between
conflicts.
You can take the following actions to resolve a data conflict.
• Add: Adds a new record to each system. The original conflicting
records remain intact.
• Ignore: Lets the conflict stand, making no change to either record.
If you select the Ignore option, you will be prompted to resolve
the conflict again the next time you run a synchronization.
A check box labeled
Apply to all conflicts
is located below the
action list box. If you
check this box, the
action you choose for
the current conflict will
be applied
automatically to any
other conflicts
detected for the
handheld application
currently being
synchronized.